The Everest EBR3 EB Series reach-in refrigerator provides 71 cu. ft. of refrigerated storage across three sections. Three full-height solid stainless steel swing doors give staff access across the width of the cabinet. Nine epoxy-coated steel wire shelves adjust on stainless steel clips throughout the open interior, and silicone-coated LED lighting illuminates the storage area. Each door closes automatically and has field-reversible hinging, a heated frame, a recessed handle, a factory-installed lock, and a removable magnetic gasket.
The bottom-mounted Blizzard R290 condensing unit uses a 3/4 HP compressor and can be replaced without on-site brazing. Electronically commutated fan motors circulate air through a full-length duct, while a floor vent guard helps prevent obstructions. Timed automatic defrost ends based on temperature, and the auto-reversing condenser fan helps clear the coil. The digital controller is factory set to 35°F, with a setting range of 33°F to 54°F. Six 5-inch swivel casters, front caster locks, and standard leg stabilizers support the cabinet.
Standard Features
- Three-section cabinet with 71 cu. ft. of refrigerated storage.
- Three full-height solid stainless steel swing doors.
- Self-closing doors with adjustable torsion closure.
- Field-reversible door hinging.
- Heated door frames and removable magnetic door gaskets.
- Recessed door handles and factory-installed locks.
- Nine epoxy-coated steel wire shelves with adjustable stainless steel clips.
- Silicone-coated LED interior lighting.
- Deep, open stainless steel interior with no walls between sections.
- Stainless steel exterior with rounded corners.
- Galvanized steel top, bottom, and rear panels.
- 2½-inch high-density polyurethane insulation in the cabinet and doors.
- Bottom-mounted, detachable Blizzard R290 condensing unit with a 3/4 HP compressor.
- Electronically commutated fan motors and full-length air duct.
- Floor vent guard helps keep the airflow path clear.
- Timed automatic defrost with temperature termination.
- Corrosion-resistant condenser and evaporator coils.
- Auto-reversing condenser fan supports coil cleaning and compressor ventilation.
- Self-maintaining condensate pan requires no external drain or electric heater.
- Cabinet pressure relief helps with reopening.
- Digital temperature controller with LED display and audible overheat alarm.
- 35°F factory setting and a 33°F to 54°F temperature setting range.
- Six 5-inch swivel casters with front locks and standard leg stabilizers.
- 115V, 60Hz, single-phase power at 7.5 amps.
- 9-foot power cord with a NEMA 5-15P plug.
