The Everest EBF3 EB Series reach-in freezer provides 71 cu. ft. of frozen storage across three sections. Three full-height solid stainless steel swing doors give staff access across the width of the cabinet. Nine epoxy-coated steel wire shelves adjust on stainless steel clips so staff can arrange products by size or storage location. Silicone-coated LED lighting illuminates the open interior. Each door closes automatically and has a heated frame, recessed handle, factory-installed lock, and a removable magnetic gasket.
The bottom-mounted Blizzard R290 refrigeration system uses two 3/4 HP compressors. The detachable refrigeration assembly can be replaced without on-site brazing. Electronically commutated fan motors circulate air through a full-length duct, and a floor vent guard helps keep the air path clear. Timed automatic defrost ends based on temperature. The digital controller is factory set to −4°F and includes an audible overheat alarm. Six 5-inch swivel casters support the cabinet, with front locks and standard leg stabilizers.
Standard Features
- Three-section cabinet with 71 cu. ft. of frozen storage.
- Three full-height solid stainless steel swing doors.
- Self-closing doors with adjustable torsion closure.
- Field-reversible door hinging.
- Heated door frames and removable magnetic door gaskets.
- Recessed door handles and factory-installed locks.
- Nine epoxy-coated steel wire shelves with adjustable stainless steel clips.
- Silicone-coated LED interior lighting.
- Deep, open stainless steel interior with no walls between sections.
- Stainless steel exterior with rounded corners.
- Galvanized steel top, bottom, and rear panels.
- 2½-inch high-density polyurethane insulation in the cabinet and doors.
- Bottom-mounted, detachable Blizzard R290 refrigeration with two 3/4 HP compressors.
- Electronically commutated fan motors and full-length air duct.
- Floor vent guard helps keep the airflow path clear.
- Timed automatic defrost with temperature termination.
- Corrosion-resistant condenser and evaporator coils.
- Auto-reversing condenser fan supports coil cleaning and compressor ventilation.
- Self-maintaining condensate pan requires no external drain or electric heater.
- Cabinet pressure relief helps with reopening.
- Digital temperature controller with LED display and audible overheat alarm.
- −4°F factory setting and a −10°F to 54°F temperature setting range.
- Six 5-inch swivel casters with front locks and standard leg stabilizers.
- 115V, 60Hz, single-phase power at 12 amps.
- 9-foot power cord with a NEMA 5-20P plug.
