The Everest EBWFH2 EB Series reach-in freezer provides 23 cu. ft. of frozen storage in one cabinet section. Two stacked solid stainless steel half-height doors let staff open the upper or lower part of the cabinet independently. Three epoxy-coated steel wire shelves adjust on stainless steel clips, and silicone-coated LED lighting illuminates the deep stainless steel interior. The self-closing doors have heated frames, recessed handles, factory-installed locks, and removable magnetic gaskets. The hinges can be reversed in the field to suit the installation.
The bottom-mounted Blizzard R290 condensing unit uses a 1/2 HP compressor and detaches for replacement without on-site brazing. Electronically commutated fan motors distribute air through a full-length duct, and a floor vent guard helps keep the air path clear. Timed automatic defrost ends based on temperature, while the auto-reversing condenser fan helps clear the coil. The digital controller is factory set to −4°F and includes an audible overheat alarm. Four 5-inch swivel casters, front caster locks, and standard leg stabilizers support the freezer.
Standard Features
- One-section cabinet with 23 cu. ft. of frozen storage.
- Two stacked solid stainless steel half-height swing doors.
- Independent access to the upper and lower storage areas.
- Self-closing doors with adjustable torsion closure.
- Field-reversible door hinging.
- Heated door frames and removable magnetic door gaskets.
- Recessed door handles and factory-installed locks.
- Three epoxy-coated steel wire shelves with adjustable stainless steel clips.
- Silicone-coated LED interior lighting.
- Deep stainless steel cabinet interior.
- Stainless steel exterior with rounded corners.
- Galvanized steel top, bottom, and rear panels.
- 2½-inch high-density polyurethane insulation in the cabinet and doors.
- Bottom-mounted, detachable Blizzard R290 condensing unit with a 1/2 HP compressor.
- Electronically commutated fan motors and full-length air duct.
- Floor vent guard helps keep the airflow path clear.
- Timed automatic defrost with temperature termination.
- Corrosion-resistant condenser and evaporator coils.
- Auto-reversing condenser fan supports coil cleaning and compressor ventilation.
- Self-maintaining condensate pan requires no external drain or electric heater.
- Cabinet pressure relief helps with reopening.
- Digital temperature controller with LED display and audible overheat alarm.
- −4°F factory setting and a −10°F to 54°F temperature setting range.
- Four 5-inch swivel casters with front locks and standard leg stabilizers.
- 115V, 60Hz, single-phase power at 5 amps.
- 9-foot power cord with a NEMA 5-15P plug.
