The Everest EBNR2 EB Series reach-in refrigerator provides 33 cu. ft. of refrigerated storage across two sections in a 39⅜-inch-wide cabinet. Two full-height solid stainless steel swing doors provide access to the open interior. Six epoxy-coated steel wire shelves adjust on stainless steel clips so staff can organize products of different heights. Silicone-coated LED lighting illuminates the shelves. Each self-closing door has a heated frame, a recessed handle, a factory-installed lock, and a removable magnetic gasket.
The bottom-mounted Blizzard R290 condensing unit uses a 1/3 HP compressor and can be replaced without on-site brazing. Electronically commutated fan motors circulate air through a full-length duct, and a floor vent guard helps prevent obstructions. Automatic defrost starts on a timer and ends based on temperature, while the auto-reversing condenser fan helps clear the coil. The digital controller is factory set to 35°F and adjusts from 33°F to 54°F. Four 5-inch swivel casters, front caster locks, and standard leg stabilizers support the cabinet.
Standard Features
- Narrow two-section cabinet with 33 cu. ft. of refrigerated storage.
- Two full-height solid stainless steel swing doors.
- Self-closing doors with adjustable torsion closure.
- Field-reversible door hinging.
- Heated door frames and removable magnetic door gaskets.
- Recessed door handles and factory-installed locks.
- Six epoxy-coated steel wire shelves with adjustable stainless steel clips.
- Silicone-coated LED interior lighting.
- Deep, open stainless steel interior with no walls between sections.
- Stainless steel exterior with rounded corners.
- Galvanized steel top, bottom, and rear panels.
- 2½-inch high-density polyurethane insulation in the cabinet and doors.
- Bottom-mounted, detachable Blizzard R290 condensing unit with a 1/3 HP compressor.
- Electronically commutated fan motors and full-length air duct.
- Floor vent guard helps keep the airflow path clear.
- Timed automatic defrost with temperature termination.
- Corrosion-resistant condenser and evaporator coils.
- Auto-reversing condenser fan supports coil cleaning and compressor ventilation.
- Self-maintaining condensate pan requires no external drain or electric heater.
- Cabinet pressure relief helps with reopening.
- Digital temperature controller with LED display and audible overheat alarm.
- 35°F factory setting and a 33°F to 54°F temperature setting range.
- Four 5-inch swivel casters with front locks and standard leg stabilizers.
- 115V, 60Hz, single-phase power at 3 amps.
- 9-foot power cord with a NEMA 5-15P plug.
