Marsal MB 236 Stacked
Slice Series Pizza Oven, deck type, gas, (2) 24" x 36" baking chambers, brick lined ceiling, 1-1/2" thick brick deck, thermostatically controlled from 300°F to 650°F, double paneled door, stainless steel top & sides, 100, 000 BTU, cETLus, ETL Sanitation, Made in USA
Marsal MB 236 Stacked Brick-Lined Gas Deck Pizza Oven - Double oven with 24” x 36” cooking surface
FEATURES:
- Light counter weight double paneled door creates an air shield, reducing heat loss and keeping the oven workspace cool
- 1½” thick cooking surface
- Stainless steel sides and top
- Heavy duty adjustable legs are welded to the oven’s base
- Ultra high temperature fiberglass insulation allows for 0” clearance on both sides to combustible and non-combustible construction
- Arched refractory brick-lined ceiling for an even, efficient oven temperature
- Thermostatically controlled from 300°F to 650°F
- Flat top oven, optional square and round dome tops available
Made in USA
MANUFACTURER WARRANTY:
- 1 year labor, 18 months parts
Optional Brick Veneer Kits are sold separately.
Image shown is for reference only and may slightly vary. Some accessories may not be included.
See a Marsal oven on the job and a testimony to the value of a Marsal oven!
- Number of Stacks:
- 2
- Dimensions:
- 70"H x 32”D x 52”W
- Width:
- 52
- Height:
- 70
- Depth:
- 32
- Type of door:
- Double Paneled
- Number of doors:
- 2
- Interior Dimensions:
- (2) 24” x 36”
- Exterior Material:
- Stainless steel sides and top
- Power Type:
- Gas
- Fuel Type:
- Natural Gas / Liquid Propane Gas
- Total btu:
- LP: (2) 50,000 NAT: (2) 50,000
- Thermostat Range:
- 300°F to 650°F
- Capacity:
- Two 18" pizzas per deck
- Ship Weight:
- 1,410 lbs
- Manufacturer Warranty:
- 1 year labor, 18 months parts
- MAP_pricing_enable:
- yes
For complete product specifications and to download the file, please click below.
Marsal MB Slice Series Brick-Lined Gas Deck Pizza Ovens Spec Sheet
For your safety, please take note that improper installation, adjustment, alteration, service or maintenance can cause property damage, injury, or death. Oven location should take into consideration proper ventilation to permit satisfactory combustion of gas and proper venting. Service access panel is located at the left side of the oven. If this is blocked off, however, service can be done from the front of the oven. The Gas Connection when installing a stacked oven with one line, there should be 1” to the tee and the 3/4” into each oven. Installation of service access, electrical connection, gas connection, gas and electrical specifications, oven location, delivery and adjustments associated with initial installation as well as assembly instructions can be viewed in full detail by clicking and downloading the link below.
Marsal Gas Deck Ovens Installation & Operating Manual
The service manual discusses testing of components, maintenance instructions and troubleshooting. Many malfunctions can be corrected by adjusting the pilot burners, main bumpers or thermostats. It is best to attempt to correct these through adjustments rather than immediately replacing parts. When troubleshooting, check the diameter of gas connections. Hard plumbing or flex lines must be 3/4” or bigger. With ovens venting into a hood, it is a must to use a stainless steel flue pipe. A draft diverter must be installed when venting directly into the ceiling. The Marsal Gas Oven Service Manual can be found in detail by clicking and downloading the link below.
Marsal Ovens Gas Service Manual
Marsal Original Equipment Warranty for US and Canada includes a One Year warranty against defects in material and workmanship and service of 1 year for Labor and 18 months for parts. This warranty applies only to the original purchaser and limited to original installations. This warranty does not cover damages to equipment or parts resulting from an accident, alteration, misuse, abuse, and negligence. Please view Marsal warranty in detail by clicking and downloading the link below.
Marsal Original Equipment Warranty
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
